Ipv6 - ZyXEL Communications LTE3302-M432 User Manual

6.6 IPv6

Use this screen to configure the LTE Device's IPv6 settings. Click Network > WAN > IPv6 from the
Configuration menu.
Figure 39 Configuration > Network > WAN > IPv6
The following table describes the labels in this screen.
Table 18 Configuration > Network > WAN > IPv6
LABEL
IPv6
IPv6 Connection
DNS Setting
Primary DNS Address
Secondary DNS
Address
LAN IPv6 Address
LAN IPv6 Link-Local
Address
Autoconfiguration
Chapter 6 WAN
DESCRIPTION
Select Enable to allow the LTE Device to run IPv6. Otherwise, select Disable.
Select DHCPv6 if you want to obtain an IPv6 address from a DHCPv6 server.
Select Obtain DNS Server address Automatically to have the LTE Device get the IPv6 DNS
server addresses from the ISP automatically.
Select Use the following DNS address to have the LTE Device use the IPv6 DNS server
addresses you configure manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Enter the IPv6 address for the LTE Device LAN interface in this field.
This shows the IPv6 Link-local address in the LAN side. This is used by LTE Device when
communicating with neighboring devices on the same link. It allows IPv6-capable
devices to communicate with each other in the LAN side.i
Click Enable if you want the devices on your local area network to obtain network
address that are not managed by a DHCPv6 server. Otherwise, select Disable.
LTE3302-M432 & LTE3312-M432 User's Guide
66