Account Screen; Edit A User Account - ZyXEL Communications LTE3302-M432 User Manual

The following table describes the labels in this screen.
Table 66 Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Cancel
Apply

23.4 Account Screen

It is strongly recommended that you change your LTE Device's system password.
If you forget your LTE Device's password (or IP address), you will need to reset the device. See
23.9 on page 152
Click Account > Account. The screen appears as shown.
Figure 105 Maintenance > Account
The following table describes the labels in this screen.
Table 67 Maintenance > Account
LABEL
#
User Name
Group
Modify

23.4.1 Edit a User Account

Use this screen to edit a users account. Click the Edit icon next to the user account you want to
configure. The screen shown next appears.
Chapter 23 Maintenance
DESCRIPTION
System Name is a unique name to identify the LTE Device in an Ethernet network.
Enter the domain name you want to give to the LTE Device.
Type how many minutes a management session can be left idle before the session times out.
The default is 300 seconds. After it times out you have to log in with your password again.
Very long idle timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
Click Cancel to begin configuring this screen afresh.
Click Apply to save your changes back to the LTE Device.
for details.
DESCRIPTION
This is the index number of the entry.
This field displays the name of the user.
This field displays the login account type of the user.
Click the Edit icon to edit this user account.
LTE3302-M432 & LTE3312-M432 User's Guide
146
Section