Interface Group; Chapter 13 Interface Group; Overview; Interface Group Screen - ZyXEL Communications LTE3302-M432 User Manual

13.1 Overview

By default, the four LAN interfaces on the LTE Device are in the same group and can communicate with
each other. Creating a new interface will create a new LAN bridge interface (subnet) (for example,
192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from default LAN
subnet (192.168.1.0/24).

13.2 Interface Group Screen

You can manually add a LAN/WLAN interface to a new group.
Use the DHCP screen to configure the private IP addresses the DHCP server on the LTE Device assigns to
the clients in the default and/or user-defined groups. See
Use the Interface Group screen to create a new interface group, which is a new LAN bridge interface
(subnet). Click Configuration > Network > Interface Group to open the following screen.
Figure 75 Configuration > Network > Interface Group
The following table describes the fields in this screen.
Table 48 Configuration > Network > Interface Group
LABEL
Add
Interface Grouping Rules
Name
LAN Interface
VID
Modify

Interface Group

DESCRIPTION
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the interface group.
This shows the VLAN ID number (from 0 to 4094) of the interface group.
Click the Delete icon to remove the user-defined group.
LTE3302-M432 & LTE3312-M432 User's Guide
C
H A P T E R
Chapter 9 on page 90
109
13
for more information.