View Log; Dhcp Table - ZyXEL Communications LTE3302-M432 User Manual

5.3.1 View Log

Use the View Log screen to see the logged messages for the LTE Device. The log wraps around and
deletes the old entries after it fills. Select what logs you want to see in the Log Setting screen. Click
Refresh to renew the log screen. Click Clear Log to delete all the logs.
Figure 26 View Log
You can configure which logs to display in the View Log screen. Go to the Log Setting screen and select
the logs you wish to display. Click Apply to save your settings. Click Cancel to start the screen afresh.
Figure 27 Log Settings

5.4 DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the LTE Device's LAN as a DHCP server
or disable it. When configured as a server, the LTE Device provides the TCP/IP configuration for the
clients. If DHCP service is disabled, you must have another DHCP server on that network, or else the
computer must be manually configured.
Click Monitor > DHCP Table or Configuration > Network > DHCP Server > Client List. Read-only information
here relates to your DHCP status. The DHCP table shows current DHCP client information (including MAC
Address, and IP Address) of all network clients using the LTE Device's DHCP server.
Chapter 5 Monitor
LTE3302-M432 & LTE3312-M432 User's Guide
51