Table of Contents
Advertisement
9.1 Overview
The VDSL Router usually uses the default gateway to route outbound traffic from computers on the
LAN to the Internet. To have the VDSL Router send data to devices not reachable through the
default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the VDSL Router's LAN interface.
The VDSL Router routes most traffic from A to the Internet through the VDSL Router's default
gateway (R1). You create one static route to connect to services offered by your ISP behind router
R2. You create another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 50 Example of Routing Topology
A
R3
9.1.1 What You Can Do in this Chapter
• Use the Default Gateway screen to select WAN interfaces to serve as system default gateways
(Section 9.2 on page
• Use the Static Route screen to view and set up static routes on the VDSL Router
page
140).
• Use the Policy Forwarding screen to configure policy routing on the Device
page
142).
• Use the RIP screen to configure RIP settings
Basic Home Station VDSL2 P8802T User's Guide
LAN
WAN
140).
C
H A PT ER
R1
R2
(Section 9.5 on page
143).
9
Routing
(Section 9.3 on
(Section 9.4 on
139
Advertisement
Table of Contents
