Wlan Station Status - ZyXEL Communications LTE3302-M432 User Manual

Figure 30 Monitor > Packet Statistics
The following table describes the labels in this screen.
Table 12 Monitor > Packet Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop

5.7 WLAN Station Status

Click Monitor > WLAN Station Status or the WLAN Station Status (Details...) hyperlink in the Status screen.
View the wireless stations that are currently associated to the LTE Device's 2.4GHz wireless network in the
Association List. Association means that a wireless client (for example, your network or computer with a
wireless network card) has connected successfully to the AP (or wireless router) using the same SSID,
channel and security settings.
Figure 31 Monitor > WLAN Station Status
Chapter 5 Monitor
DESCRIPTION
This is the LTE Device's interface type.
For the LAN ports, this displays the port speed and duplex setting or Down when the line is
disconnected.
For the WAN port, it displays Up when the mobile data connection is up, Connecting when
the LTE Device is trying to bring the mobile data connection up, and displays Down when
the 3G/4G connection is down or not activated.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and
Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total time the LTE Device has been for each session.
This is the total time the LTE Device has been on.
Enter the time interval in seconds for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s) field.
Click Stop to stop refreshing statistics.
LTE3302-M432 & LTE3312-M432 User's Guide
54