ZyXEL Communications LTE3302-M432 User Manual page 24

Chapter 2 Introducing the Web Configurator
Table 7 Navigation Panel (continued)
LINK TAB
Wireless LAN General
More AP
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
WDS
LAN IP
DHCP Server General
Advanced
Client List
NAT General
Port
Forwarding
Port Trigger
ALG
Dynamic DNS Dynamic DNS
Routing Static Route
Dynamic
Routing
Interface Interface
Group
Group
Security
Firewall General
Services
Content Filter Content Filter
IPv6 firewall Services
Application
SMS
Voice over 3G General
Call Conf.
(LTE3312-M432
only)
Management
FUNCTION
Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
Use this screen to configure multiple BSSs on the LTE Device.
Use the MAC filter screen to allow or deny wireless stations based on their MAC
addresses from connecting to the LTE Device.
This screen allows you to configure advanced wireless LAN settings.
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM QoS).
WMM QoS allows you to prioritize wireless traffic according to the delivery
requirements of individual services.
Use this screen to configure the WPS settings.
Use this screen to add a wireless station using WPS.
Use this screen to schedule the times the Wireless LAN is enabled.
Use this screen to enable and configure the WDS settings.
Use this screen to configure LAN IP address and subnet mask.
Use this screen to enable the LTE Device's DHCP server.
Use this screen to assign IP addresses to specific individual computers based
on their MAC addresses and to have DNS servers assigned by the DHCP server.
Use this screen to view information related to your DHCP status.
Use this screen to enable NAT.
Use this screen to configure servers behind the LTE Device and forward
incoming service requests to the server(s) on your local network.
Use this screen to change your LTE Device's port triggering settings.
Use this screen to enable or disable SIP (VoIP) ALG (Application Layer
Gateway) in the LTE Device.
Use this screen to set up dynamic DNS.
Use this screen to configure IP static routes.
Use this screen to enable and configure RIP on the LTE Device.
Use this screen to create a new interface group.
Use this screen to activate/deactivate the firewall.
This screen shows a summary of the firewall rules, and allows you to edit/add a
firewall rule.
Use this screen to restrict web features and designate a trusted computer. You
can also block certain web sites containing certain keywords in the URL.
Use this screen to configure IPv6 firewall rules.
Use this screen to send SMS text messages and view messages received on the
LTE Device.
Use this screen to enable Internet phone calls through the LTE Device.
Use this screen to create rules for handling incoming calls.
LTE3302-M432 & LTE3312-M432 User's Guide
24