ZyXEL Communications LTE3302-M432 User Manual page 84

Figure 52 Configuration > Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 31 Configuration > Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select Enable to turn on the WPS feature. Otherwise, select Disable.
PIN Code Select Enable and click Apply to allow the PIN Configuration method. If you select Disable,
you cannot create a new PIN number.
PIN Number This is the WPS PIN (Personal Identification Number) of the LTE Device. Enter this PIN in the
configuration utility of the device you want to connect to the LTE Device using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
WPS Status
Status This displays Configured when the LTE Device has connected to a wireless network using WPS
or when WPS Enable is selected and wireless or wireless security settings have been
changed. The current wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless security
changes on the LTE Device or you click Release Configuration to remove the configured
wireless and wireless security settings.
Release This button is only available when the WPS status displays Configured.
Configuration
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the LTE Device.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the LTE
Device.
SSID This is the name of the wireless network (the LTE Device's first SSID).
Security This is the type of wireless security employed by the network.
Cancel Click Cancel to reload the previous configuration for this screen.
Apply Click Apply to save your changes back to the LTE Device.
LTE3302-M432 & LTE3312-M432 User's Guide
Chapter 7 Wireless LAN
84