Pin Management - ZyXEL Communications LTE3302-M432 User Manual

Table 18 Configuration > Network > WAN > IPv6 (continued)
LABEL
Autoconfiguration Type
IPv6 Address
Range(Start)
IPv6 Address
Range(End)
IPv6 Address Lifetime
Cancel
Apply

6.7 PIN Management

Use this screen to enable PIN authentication and configure the PIN code. Click Network > WAN > PIN
Management from the Configuration menu.
Figure 40 Configuration > Network > WAN > PIN Management
The following table describes the labels in this screen.
Table 19 Configuration > Network > WAN > PIN Management
LABEL
PIN Code Request
function
SIM PIN Code
Apply
Cancel
Chapter 6 WAN
DESCRIPTION
Select Stateless if you want the LTE Device interface to automatically generate a link-
local address via stateless autoconfiguration.
Select Stateful (DHCPv6) when the devices connected to your LAN needs to have their
TCP/IP configuration set to DHCPv6 or obtain an IPv6 address automatically.
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which the
DHCPv6 server assigns to the clients. Enter the smallest value of the last block of the IPv6
addresses which are to be allocated.
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which the
DHCPv6 server assigns to the clients. Enter the largest value of the last block of the IPv6
addresses which are to be allocated.
If you select Stateful (DHCPv6), specify how long (in minutes) the IPv6 addresses remain
valid.
Click Cancel to reload the previous configuration for this screen.
Click Apply to save your changes back to the LTE Device.
DESCRIPTION
Select Enable to turn on PIN code authentication. A PIN (Personal Identification Number)
code is a key to a SIM card. Without the PIN code, you cannot use the SIM card.
Select Disable to turn off PIN code authentication.
If you select Enable, enter the 4-digit PIN code (0000 for example) provided by your ISP
for the inserted SIM card.
Click Apply to save your changes back to the LTE Device.
Click Cancel to reload the previous configuration for this screen.
LTE3302-M432 & LTE3312-M432 User's Guide
67