Management Wan - ZyXEL Communications LTE3302-M432 User Manual

Chapter 6 WAN
IPv6 Rapid Deployment
Use IPv6 Rapid Deployment (6rd) when the local network uses IPv6 and the ISP has an IPv4 network.
When the LTE Device has an IPv4 WAN address, you can enable 6rd to encapsulate IPv6 packets in IPv4
packets to cross the ISP's IPv4 network.
The LTE Device generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the
ISP's Border Relay router (BR in the figure) to connect to the native IPv6 Internet. The local network can
also use IPv4 services. The LTE Device uses it's configured IPv4 WAN IP to route IPv4 traffic to the IPv4
Internet.
Figure 35 IPv6 Rapid Deployment
LTE

6.4 Management WAN

The summary table shows you the WAN connection configured on the LTE Device. Click Network > WAN
> Management WAN from the Configuration menu.
Figure 36 Configuration > Network > WAN > Management WAN
LTE3302-M432 & LTE3312-M432 User's Guide
60