ZyXEL Communications LTE3302-M432 User Manual page 18

Figure 7 LTE3302-M432 Rear Panel
ANT2
Power
Figure 8 LTE3312-M432 Rear Panel
ANT2
Power
The following table describes the items on the rear panel.
Table 2 Rear Panel Ports
LABEL DESCRIPTION
ANT1 & ANT2 Install two external antennas to improve your wireless WAN signals.
Power Press the power button after the power cable is connected to start the device.
Button
DC IN 5V Connect the power cable to the micro USB port and press the power button to start the device.
SIM Card Press the button next to the SIM card slot to release the tray. Position a SIM card in the tray and slide
Slot it back into the LTE Device.
Note: Correctly and securely insert your SIM card into a SIM card adapter to avoid
possible damage to your device, if it's needed.
Reset Press the button to return the LTE Device to the factory defaults, if you forget your password or
cannot access the Web Configurator.
LAN1 ~ LAN2 Connect a device with an Ethernet port that requires high-speed Internet access. For example,
connect a computer, NAS storage device, gaming console and so on.
PHONE Connect an analog phone to the PHONE port to make phone calls over the Internet.
(LTE3312-
M432 only)
LTE3302-M432 & LTE3312-M432 User's Guide
Chapter 1 Introduction
RESET
LAN 1 LAN 2
DC IN 5V
SIM Card Slot
RESET
LAN 1 LAN 2 PHONE
DC IN 5V
SIM Card Slot
18
ANT1
ANT1