Programming Device Connections - Omron CPM2C-S100C Operation Manual

Wiring and Connections
3-4-9

Programming Device Connections

Programming Console
CQM1H-PRO01-E
(with attached 2-m cable)
CQM1-PRO01-E
(with attached 2-m cable)
C200H-PRO27-E
One-to-one Computer
Connection
78
Use one of the connecting cables shown in the following diagram to connect a
Programming Console to the CPM2C-S.
Main cable (2 m)
Peripheral port
Main cable (2 m)
C200H-CN222 (2 m)
C200H-CN422 (4 m)
CS1W-CN224 (2 m)
CS1W-CN624 (6 m)
Use one of the connecting cables shown in the following diagram to connect a
personal computer with Support Software to the CPM2C-S' RS-232C port for
1:1 Host Link communications or no-protocol (serial) communications.
CPM2C-CN111 (0.15 m)
CS1W-CN114 (0.05 m)
CPM2C-CIF01-V1
Section 3-4
CPM2C-S