Unsigned Decimal Monitor; Three-Word Data Modification - Omron CPM2C-S100C Operation Manual

Sysmac cpm2c-s series
Table of Contents

Advertisement

Programming Console Operations

8-2-19 Unsigned Decimal Monitor

1,2,3...

8-2-20 Three-Word Data Modification

!Caution Before changing the contents of I/O memory, be sure that the changes will not
1,2,3...
184
This operation is used to convert hexadecimal data in a word to unsigned dec-
imal for display. The operation can be executed while using I/O monitoring,
multiple address monitoring or 3-word monitoring.
RUN
OK
OK
1. Monitor the word that is to be used for decimal monitor without sign. During
multiple address monitoring, the leftmost word will be converted.
Multiple address monitoring
2. Press the SHIFT+TR+NOT Keys to display the leftmost word as unsigned
decimal.
SHIFT
TR
At this point, the contents of the displayed word can be changed with an
unsigned-decimal input. Refer to 8-2-25 Unsigned Decimal Data Modifica-
tion.
3. Press the CLR Key or the SHIFT+TR Keys to end the unsigned decimal
display and return to normal monitoring.
This operation is used to change the contents of one or more of the 3 consec-
utive words displayed in the Three-Word Monitor operation. It is possible in
MONITOR or PROGRAM mode only.
RUN
No
OK
cause equipment to operate unexpectedly or dangerously. In particular, take
care when changing the status of output bits. The PC continues to refresh I/O
bits even if the PC is in PROGRAM mode, so devices connected to output
points on the CPU Unit, Expansion Units, or Expansion I/O Units may operate
unexpectedly.
1. Monitor the status of the desired words according to the procedure de-
scribed 8-2-17 Three-Word Monitor.
(Three-word monitor)
2. Press the CHG Key to begin 3-word data modification. The cursor will ap-
pear next to the contents of the leftmost word.
3. Input the new value for the leftmost word on the display and press the CHG
Key if more changes will be made.
MONITOR
PROGRAM
OK
c200 cL0020000
FFF0 0000^ OFF
? 
$## 
NOT
c200 cL0020000
FFF0 0000^ OFF
CLR
MONITOR
PROGRAM
OK
, ,,
 ! "#$% &')*
D0002 3CH CHG?
00123 4567 89AB
CHG
Section 8-2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpm2c-s110cCpm2c-s100c-drtCpm2c-s110c-drt

Table of Contents