Omron CPM2C-S100C Operation Manual page 196

Programming Console Operations
174
Note The operands of MOV(21) can be word addresses, so the CONT/#
Key must be pressed to input a constant.
• Writing a Word Address
11. Input the second operand.
*
B
EM
1
LR
Press the WRITE Key to write the instruction to Program Memory. The next
program address will be displayed.
WRITE
Note When the default display value is "000", a word address can be input
immediately without pressing the Shift and CH/# Keys.
12. Input the next instruction.
F
FUN
5
Press the WRITE Key to write the instruction to Program Memory.
WRITE
• Writing an Unsigned Decimal Number
13. The first operand is input as an unsigned integer.
CONT
SHIFT TR
#
Input the value of the operand from 0 to 65535.
C F
2 5
Note If an erroneous input is made, press the CLR Key to restore the sta-
tus prior to the input. Then enter the correct input.
14. Restore the hexadecimal display.
SHIFT
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
WRITE
15. The second operand is input as a signed integer.
CONT
SHIFT
#
00202 MOV DATA B
A
0
00203READ
NOP (000)
!
A ),* #
0
! ),* ,)6) )
! ),* ,)6) )
NOT
! ),* ,)6) )
6
! ),* ,)6) )
TR
! ),* ,)6) *
00203 ADB DATA B
TR
Section 8-2
LR 10

 #$

#+00000