Omron CPM2C-S100C Operation Manual page 90

Wiring and Connections
!WARNING
!Caution Check that wiring has been performed correctly before supplying power. Sup-
I/O Configuration
68
The PC outputs may remain ON or OFF due to deposits on or burning of the
output relays or destruction of the output transistors. External safety mea-
sures must be provided to ensure safety in the system. Not providing proper
safety measures may result in serious accidents.
Note When equipment must conform to the EC Directives (Low-voltage Directives),
use a power supply with double insulation or reinforced insulation.
plying power with incorrect wiring may result in damage to internal circuits.
The following diagrams show the I/O configurations.
CPM2C-S100C and CPM2C-S100C-DRT (Sinking Transistor Outputs)
24 VDC
Don't exceed the output capacity or the maximum common current for transis-
tor outputs shown in the following table.
Item
Output capacity
Maximum common current capacity
I/O connector
Load
Load
Load
Load
24 VDC
300 mA at 24 VDC
1.2 A/common
Section 3-4
Specification