Omron CPM2C-S100C Operation Manual page 61

Specifications
CPU Unit Output Specifications
Transistor Outputs (Sinking or Sourcing)
Item
Max. switching capacity
(See note)
Min. switching capacity
Max. inrush current
Leakage current
Residual voltage
ON delay
OFF delay
Fuse
OUT01000 to OUT01005: 40 mA/4.5 VDC to 300 mA/20.4 VDC,
When using OUT01000 or OUT01001 as a pulse output, connect a dummy resistor as
required to bring the load current between 10 and 150 mA. If the load current is below 10 mA,
the ON/OFF response time will be longer and high-speed pulses will not be output.
The transistor will heat if used at 150 mA or higher, possibly damaging elements.
0.5 mA
0.9 A for 10 ms (charging and discharging waveform)
0.1 mA max.
0.8 V max.
OUT01000 and OUT01001: 20 µs max.
OUT01002 and up:
OUT01000 and OUT01001: 40 µs max. 10 to 300 mA
OUT01002 and up:
1 fuse for each 2outputs (cannot be replaced by user)
Specification
300 mA (20.4 VDC to 26.4 VDC)
0.1 ms max.
0.1 ms max. 0.5 to 10 mA
1 ms max.
Section 2-1
39