Omron CPM2C-S100C Operation Manual page 9

About this Manual:
The CPM2C-S is a compact, high-speed Programmable Controller (PC) designed for control opera-
tions in systems requiring from 10 to 106 I/O points per PC. There are two manuals describing the
setup and operation of the CPM2C-S: The CPM2C-S Operation Manual (this manual) and the CPM1/
CPM1A/CPM2A/CPM2C/SRM1(-V2) Programming Manual (W353). (The CPM1/CPM1A/CPM2A/
CPM2C/SRM1(-V2) Programming Manual is referred to as simply the Programming Manual in this
manual.)
This manual describes the system configuration and installation of the CPM2C-S and provides a basic
explanation of operating procedures for the Programming Consoles. It also introduces the capabilities
of the SYSMAC Support Software (SSS) and SYSMAC-CPT Support Software. Read this manual first
to acquaint yourself with the CPM2C-S.
Refer to the CPM2C Programmable Controller Operation Manual (W356) for descriptions of the speci-
fications and installation of Expansion I/O Units and refer to the CPM1/CPM1A/CPM2A/CPM2C/
SRM1(-V2) Programmable Controllers Programming Manual (W353) for descriptions of the specifica-
tions and installation of Expansion Units.
The SYSMAC Support Software Operation Manuals: Basics and C-series PCs (W247 and W248) pro-
vide descriptions of SSS operations for the CPM2C-S and other SYSMAC C-series PCs. The SYS-
MAC-CPT Support Software Quick Start Guide (W332) and User Manual (W333) provide descriptions
of ladder diagram operations in the Windows environment. The CX-Programmer User Manual (W361)
and the CX-Server User Manual (W362) provide details of operations for the WS02-CXPC1-E CX-Pro-
grammer.
Please read this manual carefully and be sure you understand the information provided before
attempting to install and operate the CPM2C-S.
Section 1 describes the special features and functions of the CPM2C-S, shows the possible system
configurations, and outlines the steps required before operation. Read this section first when using the
CPM2C-S for the first time.
Section 2 provides the technical specifications of the CPM2C-S CPU Unit, Adapter Units, and AC
Power Supply Unit and describes the main components of these Units.
Section 3 provides information on installing and wiring a CPM2C-S PC. Be sure to follow the direc-
tions and precautions in this section when installing the CPM2C-S in a panel or cabinet, wiring the
power supply, or wiring I/O.
Section 4 describes the structure of the CPM2C-S' memory areas and explains how to use them.
Section 5 explains how to exchange data with CompoBus/S Slaves when using the CPM2C-S as a
CompoBus/S Master.
Section 6 explains how to exchange data with a CPM2C-S100C-DRT or CPM2C-S110C-DRT
DeviceNet Master.
Section 7 explains the cycle time and I/O response time in CPM2C-S PCs. Refer to this section when
writing the user program to improve operation and reduce response delays.
Section 8 outlines the operations possible with the Programming Consoles.
Section 9 describes procedures for test runs of CPM2C-S operation, self-diagnosis functions, and
error processing to identify and correct the hardware and software errors that can occur during PC
operation.
Section 10 describes how to use the CPM1-EMU01-V1 Expansion Memory Unit. Follow the handling
precautions and procedures to properly use the Unit.
Appendix A provides tables of CPM2C-S Units and related products.
Appendix B provides the dimensions of CPM2C-S CPU Units.
Appendix C provides the support software limitations and precautions.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
ix