Appendix C
Support Software
CX-Programmer
CX-Programmer version 2.1 or later is compatible with the CPM2C-S. To use the CX-Programmer, select the
CPM2-S as the CPU type.
SYSMAC-CPT Support Software
All versions of SYSMAC-CPT Support Software can be used, but the CPM2-S cannot be selected as the CPU
type and the CQM1 - CPU43 must be selected instead. For this reason, there will be CQM1 memory area
addresses, instructions, and function settings available offline that are not supported by the CPM2-S. Errors
will occur if a program containing anything not supported by the CPM2-S is transferred from the SYSMAC-CPT
Support Software.
SYSMAC Support Software
All versions of SYSMAC Support Software can be used, but the CPM2-S cannot be selected as the CPU type
and the CQM1 must be selected instead. For this reason, there will be CQM1 memory area addresses, instruc-
tions, and function settings available offline that are not supported by the CPM2-S. Errors will occur if a pro-
gram containing anything not supported by the CPM2-S is transferred from the SYSMAC Support Software.
237