Wan - Sagem F@st 1201 Reference Manual

5.8.1

WAN

Object: This menu is associated with the remote network. It is used to display the list of all the
configured PVCs, to add PVCs or remove them.
•
Select the WAN
Field
VPI/VCI
Con. ID
Category
Service
Interface
Protocol
Igmp
State
Note: This function enables the distribution of Multicast datagrams over the local network
(LAN) and interaction between the router and the local network hosts.
Sagem Communications document. Reproduction and disclosure prohibited
menu in the Advanced Setup
PVC identifier to configure.
Connection Identification. This is used to identify the different
PPP connections which belong to the same PVC. To do so,
you need only increment the "VC number" in the "Service" field
when adding a new "PVC".
ATM type of service
Name of the ATM service. This name is made up as follows:
VPI_VCI_Protocol_index
For example: pppoe_0_35_1.
Name, allocated automatically, associated with the service
name (for example, ATM interface "ppp_0_35_1" associated
with the ATM service pppoe_0_35_1).
Data flow encapsulation mode.
Status (Enabled or Disabled) of the IGMP function. (see Note).
Status (Enabled or Disabled) of the WAN interface.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
5 - Information / Configuration
section to display the following screen:
Meaning
Page 5-19