Sagem F@st 1201 Reference Manual page 76

5 - Information / Configuration
Field
Enable NAT
Enable Firewall
Enable IGMP Multicast
Enable WAN Service
Service Name
The "Enable WAN Service" function makes it possible to disable connection types in
a list to use only the selected connection type.
Click on the Next button to continue configuring the remote network (WAN) in PPPoE/PPPoA
mode.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-42 Sagem Communications document. Reproduction and disclosure prohibited
Action
Check the box to activate the NAT function.
Check the box to activate the Firewall
service.
Check the box to activate the IGMP function.
Check the box to activate the remote
network service (WAN).
See the note of information below.
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: pppoe_pppoa_0_35_1.
Note: You may enter another service
name.
Default
Checked
Checked
Not checked
Checked
pppoe_pppoa
_0_35_1