1. Manuals
  2. Brands
  3. Sagem Manuals
  4. Network Router
  5. 1201
  6. Reference manual

Sagem F@st 1201 Reference Manual

Hide thumbs Also See for F@st 1201:
Table of Contents

Advertisement

Quick Links

Download this manual
TM
SAGEM F@st
1201/1241 V2
Reference Manual
253 151 640-A
Edition of September 2008

Advertisement

Table of Contents
loading

Related Manuals for Sagem F@st 1201

Summary of Contents for Sagem F@st 1201

  • Page 1 SAGEM F@st 1201/1241 V2 Reference Manual 253 151 640-A Edition of September 2008...
  • Page 3 1241 V2 equipment. When description is addressed to a type of quite precise equipment, the name of this equipment will be mentioned. By defect all the functions described on the SAGEM F@st 1201 V2 are also available on the SAGEM F@st 1241 V2.

  • Page 4: How Should The Document Be Used

    Annex B CE compliance declaration Annex C Environment Annex D Technical Characteristics Annex E Default configuration Glossary Annex F Connection technology Annex G SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 0-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 5: Table Of Contents

    4. Configuration of network parameters 5. Information / Configuration Accessing the welcome screen Recommendations ADSL connection status Display frame Status 5.5.1 Summary 5.5.2 Diagnostics Internet Connection SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 0-3...
  • Page 6 5.10.6 Access Control 5-110 5.10.6.1 Services 5-110 5.10.6.2 IP Address 5-111 5.10.6.3 Passwords 5-113 5.10.7 Update Software 5-114 5.10.8 System Info 5-115 5.10.9 Save/Reboot 5-117 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 0-4 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 7 C. Annex C - Environment Directive E 2002/96/CE D. Annex D - Technical Characteristics Mechanics; Display Characteristics of the different interfaces Environmental characteristics Application and protocols SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 0-5...
  • Page 8 G. Annex G - Connector Technology Pinouts of the "Line" connector Pinouts of the "Power" connector Pinouts of the "Ethernet" connector Pinouts of the "USB" connector SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 0-6 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 9: Introduction

    This section covers presentation of the SAGEM F@st 1201/1241 V2 § 1.1 equipment composition of the packaging § 1.2 required hardware and software § 1.3 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 1-1...

  • Page 10: Presentation

    1 - Introduction Presentation The present reference manual is dedicated to the SAGEM F@st 1201 V2 and SAGEM F@st 1241 V2 product ranges. These products are routers which give users, via an ADSL/ADSL2/ ADSL2+ network, broadband Internet access from their computer or their games console by various Ethernet (10 or 100 BASE-T) or USB interfaces.
  • Page 11 VPN passthrough (IPSec, IKE, PPTP, L2TP), CUSeeMe, RealAudio, Microsoft IM and others, Firewall, Spanning tree, HTTP server for easy configuration, Manual update of the application version locally. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 1-3...

  • Page 12: Composition Of Router Pack

    1 blue USB Type A male/Type B male cable (length = 1.5 m), 1 Quick Installation Guide, 1 Installation CD-ROM, microfilter(s) (option), 1 filter/splitter (option). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 1-4 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 13: Minimum Prerequisite

    • the application for installing the USB interface. • the present Reference Manual (SAGEM F@st™ 1201/1241 V2) in PDF format file. • the CE declaration of the chosen router. Incomplete or damaged supply. If on its receipt the equipment is damaged or incomplete, contact the Supplier of your router.
  • Page 14 1 - Introduction SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 1-6 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 15: Description And Connection Of Router

    § 2.2 connecting to a power socket § 2.3.1 connecting the line cable § 2.3.2 connecting your computer § 2.3.3 installation instructions § 2.4 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-1...

  • Page 16: Description

    The front face has five display LEDs (see subsection 2.1.2). The base has the LEDs names, SAGEM's mark and logo or the operator's marking as well. Below the base a label is glued on which the product's identification code, the series number and a barcode are shown.

  • Page 17: Connectors" Side View

    Miniature jack fixed connector. Power This connector enables the router to be supplied with direct current from a mains adapter unit. On/Off switch. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-3...

  • Page 18: Leds" View

    "PPP" connection is established, • goes out when the "PPP" connection is not established, • blinks when traffic is detected on the WAN interface. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 2-4 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 19: Physical Installation

    This LED is lit when the USB interface is detected. Physical installation The SAGEM F@st™ 1201/1241 may be placed on a desktop or mounted vertically on a wall. Desktop mounting Rest the SAGEM F@st™ 1201/1241 unit on its four non-slip feet.

  • Page 20: Connecting The Ports Of Your Router

    2 - Description and connection of router Connecting the ports of your router Figure 2.2 - Interconnection of ports of SAGEM F@st 1201/1241 V2 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 2-6 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 21: Connecting To A Power Socket

    First connect the end of the mains cord, supplied with the equipment, to the Power base of your router. Connect the mains adapter to a nearby mains wall socket. Set the "On/Off" switch to On. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-7...

  • Page 22: Connection Of The Adsl Cable To The Router

    Connect the other end of this cable to the connector marked ADSL on the micro-filter connected to the RJ11 telephone wall socket of your home. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 2-8 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 23: Connecting To Your Computer

    USB of your router, Connect the other end of the cable fitted with a type A connector (rectangular fixed connector) to your computer. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-9...

  • Page 24: Connecting The Ethernet Interface Of Your Router To Your Computer

    Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the yellow Ethernet fixed connector marked Ethernet of your router, Connect the other end of the cable to your computer. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 2-10 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 25: Installation Instructions

    It is prohibited to open the case. Only qualified personnel approved by your supplier may do Do not use liquid or spray cleaning agents. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-11...
  • Page 26 2 - Description and connection of router SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 2-12 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 27: Installing And Configuring The Router

    3. Installing and configuring the router SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 3-1...
  • Page 28 3 - Installing and configuring the router For the installation of the SAGEM F@st 1201/1241 V2, please refer to the Quick Installation Guide of this product. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 3-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 29: Configuration Of Network Parameters

    DHCP client Page 4-3 reading data of the DHCP server Page 4-4 reading data of the DHCP client Page 4-6 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 4-1...
  • Page 30 IP address in the configuration range defined by the DHCP server. Configuration as a DHCP client is the more commonly used solution. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 4-2 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 31 "Obtain an IP address automatically" and the case "Obtain the addresses of the DNS servers automatically". • click the OK button to confirm your choice. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 4-3...
  • Page 32 IP address of the router) to access the welcome screen, • Click the "LAN" menu of the heading Advanced Setup; the following screen appears: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 4-4 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 33 Leased Time (hour) Displays the period for obtaining (in hours) an IP address for a terminal. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 4-5...
  • Page 34 Click button Start, select Execute, enter cmd and then click OK; the command prompt screen appears. Enter ipconfig /all (or ipconfig/all) then confirm by pressing Enter. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 4-6 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 35: Information / Configuration

    § 5.6 The "NAT" section § 5.7 The "Advanced Setup" section § 5.8 The "Advanced Status" section § 5.9 The "Management" section § 5.10 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-1...

  • Page 36: Accessing The Welcome Screen

    "Password" field. Then click on to confirm. Note: The equipment's IP address (192.168.1.1) appears in the bar at the top of the screen. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-2 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 37 You can modify the password to access your router's configurer to optimise the safety of your network. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-3...

  • Page 38: Recommendations

    3) All the fields in the different screens are explained in a table. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-4 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 39: Adsl Connection Status

    Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed Allows your router to be started SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-5...

  • Page 40: Status

    Remote network IP address (WAN) Default Gateway Default gateway address Primary DNS Server Primary DNS server address Secondary DNS Server Secondary DNS server address SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-6 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 41: Diagnostics

    If the test still displays "FAIL", you must follow the troubleshooting procedure displayed on this page. • Select the Diagnostics menu in the Status section; the following screen opens: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-7...

  • Page 42: Internet Connection

    If the message "There is no ppp connection" appears, this means that the remote network (WAN) parameters have not been filled in (cf. § - 5.8.1 - Advanced Setup / WAN). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-8 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 43: Sagem F@St™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications Document. Reproduction And Disclosure Prohibited

    (WAN) to computers on the local network (LAN) via the Internal Ports. • Select the Port forwarding menu in the section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-9...
  • Page 44 This cannot be modified. Server IP Address Computer address delivered by your router's DHCP server. • Click on the Add button; the following screen will appear: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-10 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 45 When you allocate a number to an "External Port Start", the same number is automatically allocated "Internal Port Start" identically "External Port End", SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-11...
  • Page 46 The "Delta Force 2" service is available on your computer via the external ports 3568 and 3569 (WAN side) and via the internal ports 3568 and 3569 (LAN side). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-12 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 47: Port Triggering

    Port Range A port range contains a Start port and an End port. Note: A single port is characterised by an identical start port and end port. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-13...
  • Page 48 Complete the ID Host of your computer's IP address (this is attributed by your router's DHCP server). • Fill in the "Trigger Port Start", "Trigger Port End", "Trigger Port Start", "Trigger Port End" and "Protocol" fields. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-14 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 49 Using the "Trigger" 3568 port (WAN side), the "Delta Force" service server triggers the opening of port range 3100 to 3999 for your computer to access this service. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 50: Dmz Host

    Note: Click on the Save/Apply button to take account of the address or its erasure. The "DMZ" zone is deactivated by default. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-16 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 51: Alg

    Check the box to permit telephoning in VoIP via the SIP Enabled Not checked Ethernet interface using the SIP protocol (see figure below). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-17...

  • Page 52: Advanced Setup

    This menu only appears if you checked the "Enable Quality Of Service" box in the WAN interface configuration screen (see Advanced Setup/WAN – subsection 5.9.1/Add). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-18 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 53: Wan

    This function enables the distribution of Multicast datagrams over the local network (LAN) and interaction between the router and the local network hosts. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-19...
  • Page 54 This field only appears when the "UBR with PCR", "CBR", "Non Realtime VBR" or "Realtime VBR" type of service is selected. This file only appears when the "Non Realtime VBR" or "Realtime VBR" type of service is selected. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-20 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 55 PPP over ATM (PPPoA) Field Action Default Encapsulation Mode Select the encapsulation of your choice from the VC/MUX scroll down list. • VC/MUX, • LLC/ENCAPSULATION. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-21...
  • Page 56 Select the encapsulation of your choice from the LLC/SNAP- scroll down list. BRIDGING • LLC/SNAP-BRIDGING, • VC/MUX. PPPoE/PPPoA The encapsulation mode field will be selected automatically with PPPoE/PPPoA protocol type. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-22 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 57 Dial on demand Check the box to connect to Internet only for "Traffic" on the ADSL line. (with idle timeout timer) Not checked SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-23...
  • Page 58 This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked). This field only appears when the "Use Static IP Address" field is activated (box checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-24...
  • Page 59 The "WAN" menu of the "Advanced Status" section shows the "State is disable" if “Enable WAN Service” has not been selected. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-25...
  • Page 60 Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled • click on the button to save the WAN interface configuration. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-26 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 61 1 and 4320 (minutes) [1-4320]: (i.e. 72 hours). If there is no traffic for a certain period of time, the PPPoE session is interrupted. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-27...
  • Page 62 Not checked password Note: The MTU specifies the maximum size of the data used (IP packets) expressed as a number of bytes. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-28 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 63 The "WAN" menu of the "Advanced Status" section shows the "State is disable" if “Enable WAN Service” has not been selected. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-29...
  • Page 64 Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-30 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 65 This field only appears when the "Use the following IP address:" field is activated (box checked). This field only appears when the "Use the following default gateway:" field is activated (box checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 66 Enter a secondary server DNS Address. This field only appears when the "Use the following DNS server addresses:" field is activated (box checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-32 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 67 The "WAN" menu of the "Advanced Status" section shows the "State is disable" if “Enable WAN Service” has not been selected. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-33...
  • Page 68 Displays the status of the NAT: Disabled Firewall Displays the status of the firewall: Disabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-34 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 69 If you check this box, you must enter DNS server addresses: server addresses. Primary DNS server Enter a primary server DNS Address. Secondary DNS server Enter a secondary server DNS Address. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-35...
  • Page 70 The "WAN" menu of the "Advanced Status" section shows the "State is disable" if “Enable WAN Service” has not been selected. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-36 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 71 Displays the status of the NAT: Disabled Firewall Displays the status of the firewall: Disabled Displays the status of the IGMP function: Disabled IGMP Multicast SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-37...
  • Page 72 Enter the IP address of the external network of the "Set Top Box" connected virtually to this "PVC". SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-38 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 73 Displays the status of the firewall: Disabled IGMP Multicast In the "Bridge" connection, this field is: Not Applicable • click on the button to save the WAN interface configuration. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-39...
  • Page 74 1 and 4320 (minutes) [1-4320]: (i.e. 72 hours). If there is no traffic for a certain period of time, the PPPoE/PPPoA session is interrupted. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-40 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 75 The MTU specifies the maximum size of the data used (IP packets) expressed as a number of bytes. • Click on the Next button to continue configuring the remote network (WAN) in PPPoE/PPPoA mode. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-41...
  • Page 76 Click on the Next button to continue configuring the remote network (WAN) in PPPoE/PPPoA mode. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-42 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 77 Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-43...

  • Page 78: Lan

    Check this box to activate the IGMP (Internet Group Management Protocol) protocol. This not checked lets you manage the declarations of belonging to one or more groups with Multicast routers. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-44 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 79 This field only appears when the "Enable DHCP" field is activated (box checked). This field only appears when the "Configure the second IP Address and Subnet Mask for LAN interface" field is activated (box checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-45...

  • Page 80: Advanced

    LAN (Local Area Network). IP Address Displays the IP Address delivered by your 192.168.1.1 router's DHCP server to your computer. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-46 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 81: Reserved Ip Addresses

    To reserve the current address, check the "Select" box; both "MAC Address" and "IP Address" fields appear in the relevant fields of the "Reserved IP Addresses" area, then click on the button. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-47...
  • Page 82 Click in the box to delete MAC Address and IP Address of the table. All the reserved addresses belong to the range of addresses assigned by router's DHCP server (192.168.1.2 to 192.168.1.254). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-48 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 83: Security

    Source IP address / Subnet mask. Source Port Source port Dest. Address / Mask Destination IP address / Subnet mask. Dest. Port Destination port. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-49...
  • Page 84 Enter a "destination" port (WAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-50 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 85 By default, all the incoming data is refused when the Firewall is activated. • Select the Incoming sub-menu in the Security menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-51...
  • Page 86 Enter a "destination" port (LAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-52 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 87: Block Sites

    “keyword or a “Domain Name”. • Select the Block Sites sub-menu in the Security menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-53...
  • Page 88 Blocked Sites Trusted IP Address Enter the IP address of the LAN computer to be authorized access to blocked sites. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-54 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 89: Quality Of Service

    The quality of service is only significant if all the data traffic is greater than the up rate of the ADSL line. • Select the Quality of Service menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-55...
  • Page 90 : Routers mark Routing traffic to CS6, CS7 (111000) Note2: This drop-down list is present only if the box “Enable Qos” is checked. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-56 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 91: Queue Config

    QoS Queue. Enable QoS enabled or disabled for this interface. Note: This status can be amended starting from this window. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-57...
  • Page 92 : High priority for this queue, : Medium priority for this queue, : Low priority for this queue. Note : A high priority leads to low packet loss. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-58 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 93: Qos Classification

    Subject: Classification of packets into traffic classes. Enforcement of policies using queing. • Select the QoS Classification sub-menu in the Quality of Service menu to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-59...
  • Page 94 802.1P Priority field 802.1P (value between 0 and 7). Order Sequence number. Enable/Disable QoS enabled or disabled for this traffic class. Note: This status can be amended starting from this window. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-60 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 95 5 - Information / Configuration • Click on the Add button to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-61...
  • Page 96 Note: The "Enable 802.1q" box is only present in "Bridging" mode. This condition is transparent for the other modes. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-62 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 97 Select Blank or a priority value between 0 and 7 from the scroll down list. Note: 802.1p Priority cannot be selected together with IP traffic condition. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-63...

  • Page 98: Routing

    (pppoe_8_35_1 for example). Interface used this field only appears when the "Enable Automatic Assigned Default Gateway" field is deactivated (box not checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-64 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 99: Static Route

    Field Meaning Destination Remote network IP address Subnet Mask Remote subnet mask Gateway Default gateway of the remote network Interface Remote network interface SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-65...
  • Page 100 Empty Use Interface Select the interface you want to use from Box checked the scroll down list (pppoe_8_35_1 for Interface example). used SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-66 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 101: Rip

    (silent mode). Enabled Check the box to activate the "RIP" function on Box not the interface you want (LAN or WAN for checked example). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-67...

  • Page 102: Dns

    Secondary DNS server Enter a secondary DNS server address. This field only appears when the "Enable Automatic Assigned DNS" field is deactivated (box not checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-68 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 103: Dynamic Dns

    On the screen above, The fields of the table are detailed in the next subsection (Add). The "Service" field is automatically filled by the system in "dyndns". SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 104 5 - Information / Configuration SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-70 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 105 Enter the account name supplied to you by the dynamic DNS provider. Password Enter the account password provided to you by the dynamic DNS provider. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-71...

  • Page 106: Dsl

    AnnexL Enabled Box checked ADSL2+ Enabled Box checked AnnexM Enabled Box not checked Check the boxes according to the characteristics of your line. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-72 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 107 Click on the Advanced Settings button to display the following screen: Field Default Normal Selected box Reverb Box not selected Medley Box not selected No retrain Box not selected Box not selected SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-73...
  • Page 108 All the tones are selected by default. To select a tone, simply check the associated box. To not select a tone, simply leave its associated box empty. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-74 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 109: Port Mapping

    Eth0 Checked By default, all the interfaces are dedicated to data and are associated with the first VC (Virtual Channel) existing or created. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-75...
  • Page 110 5 - Information / Configuration • Click on the Add button to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-76 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 111 "Available Interfaces" area select USB for the USB interface. then click on the button to transfer this interface to the "Grouped Interfaces" area. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-77...
  • Page 112 This screen indicates that: the Default "Group Name" is associated with the eth0 interface. the usb0 interface is associated with the "Data2" service. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-78 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 113 5 - Information / Configuration To enable you to understand better, the following diagram shows the path of the "data1" and "Data2" flows. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-79...

  • Page 114: Certificate

    Summarises the main characteristics of the certificate. Type Indicates the status of the certificate (e.g.: request). Action Select the action from the list: view, load signed certificate, remove. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-80 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 115: Create Certificate Request

    Enter the name of the state of province State/Province Name Country/Region Name Select the country from the scroll down list SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-81...
  • Page 116 Field Action Default Enter the name of the certificate Certificate Name Certificate Insert the certificate here Private key Insert the private key here SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-82 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 117: Trusted Ca

    CPE and the ACS. • Select the Trusted sub-menu in the Certificate menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-83...
  • Page 118 Enter the name of the certificate to be imported. Certificate Name Certificate Insert the certificate here. Private Key Insert the private key here. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-84 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 119: Advanced Status

    This menu is used to display all the parameters which concern the remote network. • Select the menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-85...

  • Page 120: Statistics

    This menu is used to display all the parameters which concern the local network (LAN). • Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-86 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 121: Wan

    Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset WAN statistics. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-87...

  • Page 122: Atm

    This menu is used to display all the ATM statistics of the line. • Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-88 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 123: Adsl

    Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset ADSL statistics. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-89...
  • Page 124 "Test Time (sec)" field, select the test time from the scroll down list. • Click on the button to run test. • Click on the button to shut window and return to the previous screen. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-90 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 125: Route

    This menu is used to display all the information concerning your router's routing. • Select the Route menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-91...

  • Page 126: Arp

    IP address. • Select the menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-92 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 127: Dhcp

    This menu is used to display all the computers which obtained an IP address from the router's DHCP server. • Select the DHCP menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-93...

  • Page 128: Upnp Info

    Displays the LAN port. Ext. port Displays the WAN port. Displays the LAN IP address. IP address Displays the name of the application. Description SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-94 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 129: Management

    This menu contains the following three sub menus: • Backup (cf. § 5.10.1.1), • Update (cf. § 5.10.1.2), • Restore Default (cf. § 5.10.1.3). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-95...

  • Page 130: Backup

    It is recommended to save the current configuration on your computer to a file • Select the Backup sub menu in the Settings menu of the Management section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-96 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 131 Click on the Save button to save the current configuration file, for example, on your computer. • Select the directory where you want to save the "backupsettings.conf" configuration file. The process takes a few seconds. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-97...

  • Page 132: Update

    Select the configuration file then click on the Update Settings button to recover a configuration which has already been saved. The process takes around 2 minutes. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-98 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 133: Restore Default

    A few moments after, the screen of the "Internet Connection" menu appears. To refer to paragraph 5.6. The process takes around 2 minutes. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-99...

  • Page 134: System Log

    This menu is used to view and/or configure the events which occur on your router. • Select the System Log menu in the Management section to display the following screen: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-100 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 135: View System Log

    (see table in the next paragraph - "Configure System Log"). • Click on the Save button to save all the events allocated to the severity you configured. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 136: Configure System Log

    5 - Information / Configuration Configure System Log • Click on the Configure System Log button to configure the events which occur on your router. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-102 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 137 The severities are classified in decreasing order of importance. • Emergency, • Alert, • Critical, • Error, • Warning, • Notice, • Informational, • Debugging. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-103...
  • Page 138 Enter the number of the port associated with the "Syslog" server. This field only appears when the mode selected is "Remote or "Both". SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-104 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 139: Snmp Agent

    Enter the IP address towards which the traps of 0.0.0.0 Trap Manager IP the hosts are directed. Note: This is the gateway address of your router. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-105...
  • Page 140 Field Action Read Community Iris (RO) Set Community Cyclamen (RW) rose System Name France System Location System Contact Myrouter@sagem/com Trap Manager IP 192.168.1.1 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-106 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 141: Client

    Click on the button to launch the auto-configuration procedure of your router. This field only appears when the "connection Request Authentication" is activated (box checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-107...

  • Page 142: Internet Time

    GMT (Greenwich Mean Time). Note: For these events to be displayed and/or saved at an effective date and time, you should check this box. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-108 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 143 (summer time or winter not checked time) changes This field only appears when the "Automatically synchronize with Internet time servers" is activated (box checked). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-109...

  • Page 144: Access Control

    Note: The ICMP service is always activated on the local network (LAN) and may be activated or deactivated on the remote network (WAN). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-110 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 145: Ip Address

    Field Action Default Select Enable to activate the access control Access Control Mode Box not mode or Disable to not activate it. checked SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-111...
  • Page 146 Click on the Add button to add an IP address. Note: From this address you may access the local management services when the access control is active. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-112 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 147: Passwords

    Enter your new password Confirm Password Confirm your new password Note: The password is a string of a maximum of 16 alphanumerical characters. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-113...

  • Page 148: Update Software

    The process takes around 2 minutes. The application of a new software version for the router does not modify the current configuration at all. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-114 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 149: System Info

    (sysinfo) with f24 type. • Select System Info menu in the Management section ; the following screen will appear: SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 150 This file can be opened with different apllications as spreadsheet program, word processing for example Microsoft Excel, Microsoft Word, Notepad and so on. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-116 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 151: Save/Reboot

    Click on the Save/Reboot button to restart the router. The process takes around 1 minute. A countdown is displayed to tell the user how long is left to wait. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-117...
  • Page 152 5 - Information / Configuration SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 5-118 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 153: Internet Access Service

    6. Internet access service This section covers the introduction § 6.1 connecting to Internet access § 6.2 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 6-1...

  • Page 154: Introduction

    DNS addresses are correctly configured in each terminal. The router enables DNS queries to be relayed. Connection for Internet access When installation is complete the "SAGEM" welcome page appears. You can now surf the Internet. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 6-2 Sagem Communications document.

  • Page 155: Updating The Application

    7. Updating the application This section covers updating the application version. P 7-2 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page 7-1...
  • Page 156 To check that the new version has been correctly downloaded, click the command Status/Summary at the top left of the welcome screen of the HTTP configurator. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page 7-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 157: A. Annex A - Troubleshooting

    § A.5 Loss of the password § A.6 reinitialising your router § A.7 resetting with the factory configuration. § A.8 no-connection mode. § A.9 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page A-1...

  • Page 158: Annex A - Troubleshooting

    Check that the IP address entry contains a value other than 0.0.0.0 (192.168.1.10, for example). All the troubleshooting procedures described below are performed in Windows® XP. These procedures in other Windows® operating systems may differ slightly. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page A-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 159: Front Face Leds

    Blinking ADSL quickly synchronisation training Blinking ADSL line not slowly connected Power Public address Inactive Ethernet link Inactive USB link not present unavailable SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page A-3...

  • Page 160: Supervising Your Router

    Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed. Allows your router to be started. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page A-4 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 161: Diagnostics" Tool

    (PASS in green, DOWN in orange and FAIL in red) and supplies the appropriate troubleshooting procedures. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page A-5...
  • Page 162 If you experience difficulties connecting to the Internet, we recommend that you restart your router (cf.A.6) or possibly re-establish the factory configuration (cf. § A.8). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page A-6 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 163: Interpreting The Leds

    Check that the delivered power cord is properly connected at one end to the mains power network. Check that the power connector is inserted correctly in the corresponding connector (power) of the router. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page A-7...

  • Page 164: Loss Of Your Residential Gateway's Password And Ip Address

    CD-ROM, or to enter again the ADSL connection data supplied by your Internet Service Provider (ISP) (cf. Internet Connection section - § 5.6). SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page A-8 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 165: Offline Mode

    LAN interface appears in the browser's Address field but the home screen does not appear. The screen opposite appears. Click The screen opposite appears. Click SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page A-9...
  • Page 166 In the menu bar, select the "File" menu then deselect the "Work Offline" command. Click OK in the browser's "Address" field to display the home screen. When the router is installed, this box is checked. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page A-10 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 167: Annex B - Warnings For Safety

    B. Annex B - Warnings for safety This section covers Warnings for safety § B.1 the CE conformity declaration § B.2 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page B-1...

  • Page 168: Warnings For Safety

    USB interface port SELV Ethernet port SELV Primary power port Level 3 Telecommunication Network Voltage Safety Extra Low Voltage Circuit Hazardous Primary Voltage circuit SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page B-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 169: Ce Compliance Declaration

    1241 V2) is made in the context of the R&TTE directive. This conformity is presumed through the complete compliance with European harmonised standards. Sagem communication declines all liability if the regulations in force in the place of installation are not followed. conformity...
  • Page 170 Annex B - Warnings for safety SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page B-4 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 171: Annex C - Environment

    C. Annex C - Environment This section covers directive E 2002/96/CE § C.1 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page C-1...

  • Page 172: Directive E 2002/96/Ce

    Preservation of the environment as part of a sustainable development logic is an essential concern of Sagem Communications. Sagem Communications‘ aim is to operate systems safeguarding the environment and consequently it has decided to integrate environmental performance considerations in the life cycle of its products, from manufacturing to commissioning, use and disposal.

  • Page 173: D. Annex D - Technical Characteristics

    § D.1 the characteristics of the different interfaces § D.2 environmental characteristics § D.3 the application and the protocols § D.4 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page D-1...

  • Page 174: Annex D - Technical Characteristics

    Green Power LED Link • Green LED • Data Green Internet LED Ethernet • Green local network (Ethernet) LED • Green local network (USB) LED SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page D-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 175: Characteristics Of The Different Interfaces

    • Half/Full Duplex • Standard 802.3 mm • Connection technology RJ45 • Type MDI or MDI-x self-detecting port • Crossed or straight cord SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page D-3...

  • Page 176: Environmental Characteristics

    UIT-T K21 Ed 2000 : basic level Electromagnetic compatibility • Susceptibility/Emission EN 301 489-1 Ed . 2002 • EN 301 489-17 Ed . 2002 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page D-4 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 177: Application And Protocols

    LAN or WAN port (with specific option) Management • From ETH, USB and WAN (with specific option) • Downloading of version Client by http mode SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page D-5...
  • Page 178 Annex D - Technical Characteristics SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page D-6 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 179: E. Annex E - Default Configuration

    § E.1 the default configuration for the local network (LAN) § E.2 the default configuration for the remote network (WAN) § E.3 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page E-1...

  • Page 180: Annex E - Default Configuration

    The LAN traffic is routed to your ISP NAT/PAT Activated Default configuration for the remote network (WAN) Designation Value Linking protocol PPPoA DNS relay DHCP server ADSL/ADSL2/ADSL2+ Multimode SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page E-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 181: Annex F - Glossary

    F. Annex F - Glossary SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page F-1...
  • Page 182 Operation, Administration and Maintenance Password Authentification Protocol Peripheral Component Interconnect Pulse Code Modulation PCMA Pulse Code Modulation Loi A PCMCIA Personal Computer Memory Card International Association SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page F-2 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 183 VC MultipleXing (encapsulation sans en-tête) Virtual Path Virtual Path Identifier Virtual Private Network Wide Area Network Meshed network of information servers Weighted Fair Queuing SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page F-3...
  • Page 184 Annex F - Glossary SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page F-4 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 185: G. Annex G - Connector Technology

    § G.1 pinouts of the "Power" connector § G.2 pinouts of the "Ethernet" connector § G.3 pinouts of the "USB" Connector § G.4 SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page G-1...

  • Page 186: Annex G - Connector Technology

    The mains unit is connected to the equipment using the miniature fixed connector of the case. Signal Meaning +10 V (standard) External DC "+" connection +12 V (Australia) Internal Earth DC "-" connection SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page G-2 Sagem Communications document. Reproduction and disclosure prohibited...

  • Page 187: Pinouts Of The "Ethernet" Connector

    Not connected The Ethernet port is self-detecting. You can use either straight or crossed cables. An emission or reception signal is detected automatically. SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Sagem Communications document. Reproduction and disclosure prohibited Page G-3...

  • Page 188: Pinouts Of The "Usb" Connector

    The "USB" interface is connected to the equipment using a type B female USB fixed connector. Contact N° Signal Meaning PC power (+) - Data Subscriber line signal + Data Subscriber line signal Ground Earth SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A Page G-4 Sagem Communications document. Reproduction and disclosure prohibited...
  • Page 190 Siège social : Le Ponant de Paris - 27, rue Leblanc - 75015 PARIS - FRANCE Tél. : +33 (0)1 58 11 77 00 - Fax : +33 (0)1 58 11 77 77 http://www.sagem-communications.com S.A.S au capital de 158 291 895 € - 440 294 510 RCS Paris...

This manual is also suitable for:

F@st 1241 v2

Table of Contents