Advanced Setup; Wan - Sagem F@st 2604 Reference Manual

5 - Information / Configuration
5.9

Advanced Setup

Object: This menu is used to configure the specific parameters for your router.
This menu must only be used by experienced
This section contains the following nine menus:
•
WAN (see subsection 5.9.1),
•
LAN (see subsection 5.9.2),
•
Security (see subsection 5.9.3),
•
Quality of Service (see subsection 5.9.4)(see note),
•
Routing see subsection 5.9.5),
•
DNS (see subsection 5.9.6),
•
DSL (see subsection 5.9.7),
•
Port Mapping (see subsection 5.9.8),
•
Certificate (see subsection 5.9.9).
Note: This menu only appears if you checked the "Enable Quality Of Service" box in the
WAN interface configuration screen (see Advanced Setup/WAN –
subsection 5.9.1/Add).
5.9.1

WAN

Object: This menu is associated with the remote network. It is used to display the list of all the
configured PVCs, to add PVCs or remove them.
•
Select the WAN
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-52 Sagem Communications document. Reproduction and disclosure prohibited
menu in the Advanced Setup
users.
section to display the following screen: