Sagem F@st 1201 Reference Manual page 86

5 - Information / Configuration
Add
•
Click on the Add button to display the following screen:
Field
Filter Name
Protocol
Source IP Address
Source Subnet Mask
Source Port
(port or port:port)
Dest. IP Address
Dest. Subnet Mask
Dest. Port
(port or port:port)
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-52 Sagem Communications document. Reproduction and disclosure prohibited
Enter a representative name for the filter.
Select the dedicated protocol from the scroll down list
(TCP/UDP, TCP, UDP, ICMP).
Enter the Source IP address (WAN).
Subnet mask.
Enter a "Source" port (WAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
Enter the destination IP address (LAN).
Subnet mask.
Enter a "destination" port (LAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
Action