Annex A - Troubleshooting; Checking The Attribution Of An Ip Address - Sagem F@st 1201 Reference Manual

Annex A - Troubleshooting

A.1 Checking the attribution of an IP address
In Windows Vista, XP, 2000 and Me
Click the Start button, select Run, enter cmd then click OK, the "Prompt command" screen
appears. Enter ipconfig then confirm by pressing Enter.
Check that the IP address entry contains a value other than 0.0.0.0 (192.168.1.10, for
example).
All the troubleshooting procedures described below are performed in
Windows® XP. These procedures in other Windows® operating systems
may differ slightly.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page A-2 Sagem Communications document. Reproduction and disclosure prohibited