Accessing The Welcome Screen - Sagem F@st 1201 Reference Manual

5 - Information / Configuration
5.1

Accessing the welcome screen

To access this screen, you must have configured your computer's network function
Ethernet or USB interfaces using the installation CD-ROM provided with your router
(cf. chapter 3).
If you are using your computer's Ethernet card to configure your router, connect it to the
Ethernet port whose yellow socket is marked ETH.
Your router is then configured using a simple Web browser (e.g. Internet Explorer).
The router's DHCP server function is activated by default with an address range
defined as indicated in §.5.8.2.
To access the configurer, proceed as follows:
1 In the Start
2 The following screen asks you to connect.
Enter admin
Enter admin
Then click on
Note: The equipment's IP address (192.168.1.1) appears in the bar at the top of the
screen.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-2 Sagem Communications document. Reproduction and disclosure prohibited
menu, select All Programs
.
by default in the "Username" field.
by default in the "Password" field.
OK to confirm.
/ SAGEM F@st 1201, then left click on