Sagem F@st 1201 Reference Manual page 60

5 - Information / Configuration
•
Click on the Next button to continue configuring the remote network (WAN) in PPPoA
mode.
Field
VPI/VCI
Connection Type
Service Name
Service Category
IP Address
Service State
NAT
Firewall
IGMP Multicast
•
click on the
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-26 Sagem Communications document. Reproduction and disclosure prohibited
Displays the VPI/VCI specific to the "PPPoA" connection
Displays the "PPPoA" protocol
Displays the name of the service: pppoa_0_35_1
Displays the type of service adapted to the traffic required.
Indicates that the IP address is allocated automatically:
Automaticaly Assigned
Displays the status of the service: Enabled
Displays the status of the NAT: Enabled
Displays the status of the firewall: Enabled
Displays the status of the IGMP function: Disabled
button to save the WAN interface configuration.
Action