•
Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
Field
VPI/VCI
Connection Type
Service Name
Service Category
IP Address
Service State
NAT
Firewall
IGMP Multicast
Sagem Communications document. Reproduction and disclosure prohibited
Displays the VPI/VCI specific to the "IPoA" connection
Displays the "IPoA" protocol
Displays the name of the service: ipoa_0_35_1
Displays the type of service adapted to the traffic required.
Displays the IP address entered: 192.168.1.10
Displays the status of the service: Enabled
Displays the status of the NAT: Disabled
Displays the status of the firewall: Disabled
Displays the status of the IGMP function: Disabled
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
5 - Information / Configuration
Action
Page 5-37