Sagem F@st 1201 Reference Manual page 48

5 - Information / Configuration
Add
•
Click on the Add button; the following screen will appear:
To configure "Trigger Port" and "Open Port", proceed as follows:
Check the "Select an application" box, then select the service of your choice from the
scroll down list, for example "Aim Talk".
The "Trigger Port Start", "Trigger Port End", "Trigger Port Start", "Trigger Port End"
and Protocol fields (transport protocol associated with this service) are automatically filled
in the table.
Note: You may complete the table by adding other ports associated with a protocol.
or
Check the "Custom Server" box then enter the name of the server you want to connect to,
then:
•
Complete the ID Host of your computer's IP address (this is attributed by your router's
DHCP server).
•
Fill in the "Trigger Port Start", "Trigger Port End", "Trigger Port Start",
"Trigger Port End" and "Protocol" fields.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-14 Sagem Communications document. Reproduction and disclosure prohibited