Sagem F@st 1201 Reference Manual page 67

•
Click on the Next button to continue configuring the remote network (WAN) in MER mode.
Field
Enable NAT
Enable Firewall
Enable IGMP Multicast
Enable WAN Service
Service Name
The "Enable WAN Service" function makes it possible to disable connection types in
a list to use only the selected connection type. The "WAN" menu of the
"Advanced Status" section shows the "State is disable" if "Enable WAN Service"
has not been selected.
Sagem Communications document. Reproduction and disclosure prohibited
Action
Check the box to activate the NAT
function.
Check the box to activate the firewall
service.
Check the box to activate the IGMP
function.
Check the box to activate the WAN
service.
See the note of information below.
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: mer_0_35_1.
Note: You may enter a different service
name.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
5 - Information / Configuration
Not checked
mer_0_35_1
Default
Checked
Checked
Checked
Page 5-33