2 - Description and connection of router
2.1.2
"LEDs" view
The different green LEDs of the figure below are described in the following table:
Marking
Power
Link
Data
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 2-4
Sagem Communications document. Reproduction and disclosure prohibited
Power LED:
•
lits green if power is present,
•
blinks in the case of failure detected at the time of starting,
•
goes out if there is no power.
ADSL LED:
•
blinks slowly when the ADSL is not detected,
•
blinks quickly when the ADSL line is being synchronised,
•
stays lit when the ADSL line is detected.
Internet connection LED:
•
stays lit when the "PPP" connection is established,
•
goes out when the "PPP" connection is not established,
•
blinks when traffic is detected on the WAN interface.
Meaning