1) Configuring as a DHCP client
In Windows XP
•
click Start/Control Panel/Network
Connections.
•
right-click the appropriate network, and
then select Properties; the
Local Area Connection Properties
appears.
•
select the protocol TCP/IP of the
network card, and then click the
Properties button; the screen Internet
Protocol (TCP/IP) Properties
appears.
•
select the general tab, then the case
"Obtain an IP address automatically"
and the case "Obtain the addresses
of the DNS servers automatically".
•
click the OK button to confirm your
choice.
Sagem Communications document. Reproduction and disclosure prohibited
4 - Configuration of network parameters
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 4-3