Port Triggering - Sagem F@st 1201 Reference Manual

5.7.2

Port Triggering

Object: The purpose of this menu is to open dynamically the firewall ports (open ports) via
"Trigger Ports" when an application (such as games) opens a connection via the
transport layer (TCP or UDP).
•
Select the Port Triggering
Field
Application
Trigger
Open
Sagem Communications document. Reproduction and disclosure prohibited
menu in the
Name Application name
Protocol Transport protocol (TCP, UDP or TCP/UDP).
Port Range A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port
and end port.
Protocol Transport protocol (TCP, UDP or TCP/UDP).
Port Range A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port
and end port.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
5 - Information / Configuration
NAT section to display the following screen:
Meaning
Page 5-13