Sagem F@st 1201 Reference Manual page 96

5 - Information / Configuration
Traffic Class Name
Rule Order
Rule Status
Assign Classification Queue
Assign Differentiated Services
Code Point (DSCP) Mark
Mark 802.1p if 802.1q is enabled
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-62 Sagem Communications document. Reproduction and disclosure prohibited
Field
on WAN
Action
Enter a name for the traffic class you want to create
Select from the scroll down list:
Blank :
Last :
Number : Number allotted by the system to the
existing rules.
Select from the scroll down list:
Blank :,
Disable : QoS disabled for this static class rule,
Enable : QoS enabled for this static class rule.
Select from the scroll down list:
Blank :
Number : Priority number and associated queue
number, defined by the system starting
from the "Queue Precedence"
(see subsection 5.8.4.1).
Select the type of Differentiated Services Code
Point (DSCP) mark to be allocated
(6-bit coding) from the scroll down list.
Default to CS7
See the first table of this chapter.
Select Blank or a priority value between 0 and 7
from the scroll down list.
Note: The "Enable 802.1q" box is only present in
"Bridging" mode. This condition is
transparent for the other modes.
: 000000 to 111000