Routing; Default Gateway - Sagem F@st 1201 Reference Manual

5 - Information / Configuration
5.8.5

Routing

This menu contains 3 sub-menus:
•
Default Gateway (see subsection 5.8.5.1),
•
Static Route (see subsection 5.8.5.2),
•
RIP (see subsection 5.8.5.3).
5.8.5.1

Default Gateway

Object: This menu is used either to allocate dynamically a default gateway address to the
router from a PVC or to enter an address or choose an interface.
•
Select the Default Gateway
section to display the following screen:
Field
EnableAutomatic Assigned
Default Gateway
Use Default Gateway IP
Address
Use Interface
11
this field only appears when the "Enable Automatic Assigned Default Gateway" field is deactivated (box not
checked).
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-64 Sagem Communications document. Reproduction and disclosure prohibited
sub-menu in the
Check the box to allocate automatically a
default gateway for your router.
Check the box to use a default address.
11
11
Check the box then select the interface
you want to use from the scroll down list
(pppoe_8_35_1 for example).
Routing menu in the
Action
Advanced Setup
Default
Box checked
Box checked
empty
Box
not checked
Interface
used