Interpreting The Leds; The "Link" Led Blinks Slowly; All Leds Are Off - Sagem F@st 1201 Reference Manual

A.5 Interpreting the LEDs
A.5.1

The "Link" LED blinks slowly

Check the connection of your ADSL filters. Each telephone socket of your installation which
is used must be equipped with an ADSL filter.
Check that the RJ11 type line cord delivered with your router is connected to one of your
sockets. It is recommended that no telephone extension cable is used.
Finally, check with your ISP on the availability of the ADSL service on your telephone line.
A.5.2

All LEDs are off

Check that the type of power available in your premises is compatible with the mains
voltage required for powering your router.
Check that the delivered power cord is properly connected at one end to the mains power
network.
Check that the power connector is inserted correctly in the corresponding connector (power)
of the router.
Sagem Communications document. Reproduction and disclosure prohibited
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Annex A - Troubleshooting
Page A-7