Sagem F@st 1201 Reference Manual page 70

5 - Information / Configuration
•
Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
Field
Enable NAT
Enable Firewall
Enable IGMP Multicast
Enable WAN Service
Service Name
The "Enable WAN Service" function makes it possible to disable connection types in
a list to use only the selected connection type. The "WAN" menu of the
"Advanced Status" section shows the "State is disable" if "Enable WAN Service"
has not been selected.
SAGEM F@st™ 1201/1241 V2 Reference Manual - 253151640-A
Page 5-36 Sagem Communications document. Reproduction and disclosure prohibited
Action
Check the box to activate the NAT
function.
Check the box to activate the firewall
service.
Check the box to activate the IGMP
function.
Check the box to activate the WAN
service.
See the note of information below.
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: ipoa _0_35_1.
Note: You may enter another service
name.
Default
Box checked
Box checked
Box not
checked
Box checked
ipoa_0_35_1