Accessing The Welcome Screen - Sagem F@st 2604 Reference Manual

5 - Information / Configuration
5.1

Accessing the welcome screen

To access this screen, you must have configured one of your computer's interfaces
using the installation CD-ROM provided with your router:
•
SAGEM F@st
If you are using your computer's Ethernet card to configure your router, connect it to an Ethernet
port (ETH1 to ETH4)).
Your router is then configured using a simple Web browser (e.g. Internet Explorer).
The router's DHCP server function is activated by default with an address range
defined as indicated in subsection.5.9.2.
To access the configurer, proceed as follows:
1 In the Start
2 The following screen asks you to connect.
Enter admin
Enter admin
Then click on
Note: The equipment's IP address (192.168.1.1) appears in the bar at the top of the
screen.
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-2 Sagem Communications document. Reproduction and disclosure prohibited
TM
2604/2644
menu, select All Programs
.
by default in the "Username" field.
by default in the "Password" field.
OK to confirm.
see chapter 3.
/ SAGEM F@st 2604, then left click on