Config Authen Application - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
4-13 show authen_enable
Description
This command is used to display the method list of authentication methods for promoting a user's
privilege to Administrator level.
Format
show authen_enable [default | method_list_name <string 15> | all]
Parameters
default - Specifies to display the default method list for promoting a user's privilege to
Administrator level.
method_list_name - Specifies the user-defined method list for promoting a user's privilege to
Administrator level.
<string 15> - Enter the user-defined method list for a promoting a user's privilege to
Administrator level . The method list name value can be up to 15 characters long.
all - Specifies to display all method lists for promoting a user's privilege to Administrator level.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all method lists for promoting a user's privilege to Administrator level:
DGS-3620-28PC:admin#show authen_enable all
Command: show authen_enable all
Method List Name Priority
---------------- --------
default 1
enable_list_1 1
2
3
4
enable_list_2 1
2
Total Entries : 3
DGS-3620-28PC:admin#
4-14

config authen application

Description
This command is used to configure login or enable method list for all or the specified application.
Method Name Comment
--------------- ------------------
local_enable Keyword
tacacs+ Built-in Group
tacacs Built-in Group
mix_1 User-defined Group
loca_enable Keyword
tacacs+ Built-in Group
radius Built-in Group
68