Going Back To The Previous Menu; Returning To Default State In Function Groupings; Returning Knob Parameters To Default State; Shortcut Menu - Sony MVS-8000X User Manual

For details, see "Assigning Functions to the Menu Control
Block Top Menu and User Preference buttons" in Chapter
19 (Volume 2).

Going Back to the Previous Menu

To return to the last displayed menu, press the previous
page button.
Returning to Default State in
Function Groupings
1
Press the [Default Recall] button, turning it on.
This enters the menu default recall mode.
2
Press the VF button you want to return to the default
state.
This returns the settings within the function grouping
to the default state, and the [Default Recall] button
goes off.
Notes
The default state of the settings depends on the setting of
the initial status mode, set in the Setup menu of system
setup, as follows.
User: The state when [Initial Status Define] is executed.
Factory: Factory default settings
Returning Knob Parameters to
Default State
1
Press the [Default Recall] button, turning it on.
This enters the menu default recall mode.
2
Press the knob parameter button you want to return to
the default state.
This returns the knob parameter value to the default
state, and the [Default Recall] button goes off.
For details, see the table, "Knob parameters subject to
restriction on default recall" on page 352.
Notes
The default recall function does not return the horizontal
(H) and vertical (V) position settings to their default state
individually. Returning the horizontal (H) position to its
default state also returns the vertical (V) position to its
default state automatically, and vice versa.
60

Shortcut Menu

Shortcut Menu
Registering a Menu To the Shortcut
Menu
1
In the Home >Favorites >Shortcut menu, select the
desired group.
2
Display the menu you want to register, and then press
the [Add Favorite] button.
The currently displayed menu is automatically
registered to a blank button.
Recalling a Menu Using the Shortcut
Menu
1
In the Home menu, select VF2 'Favorites' and HF1
'Shortcut.'
The following menu appears.
2
In the [Group Select] box, select the group.
The group buttons appear.
3
Press the button for the desired menu.

Customizing the Shortcut Menu

Assign frequently used menus to buttons, to create a
"Favorites" menu.
To create a menu group
1
In the Home menu, select VF2 'Favorites' and HF1
'Shortcut.'
The following menu appears.