Blur Settings - Sony MVS-8000X User Manual

When Video/Key is selected (with SDI-interfaced
DME)
Parameter group [1/2]
Knob Parameter Adjustment
1 V/K H Horizontal
defocusing of
video and
key signals
2 V/K V Vertical
defocusing of
video and
key signals
3 V/K All Horizontal
and vertical
defocusing of
video and
key signals
4 Video All Horizontal
and vertical
defocusing of
video signal
5 Key All Horizontal
and vertical
defocusing of
key signal
Parameter group [2/2]
Knob Parameter Adjustment
1 Video H Horizontal
defocusing of
video signal
2 Video V Vertical
defocusing of
video signal
3 Key H Horizontal
defocusing of
key signal
4 Key V Vertical
defocusing of
key signal
When Video is selected
.
Knob Parameter Adjustment
1 H Horizontal
defocusing of
video signal
2 V Vertical
defocusing of
video signal
3 All Horizontal
and vertical
defocusing of
video signal
Setting values
Video H value
shown
Video V value
shown
Video H value 5
shown
Video H value
Masking the Defocus effect with a selected
shown
pattern
Press [Mask] to display the Mask menu, and set the pattern
Key H value shown type and modifiers (see page 261).

Blur Settings

Applying the Blur effect
Settings values
0.00 to 100.00
1
0.00 to 100.00
2
0.00 to 100.00
0.00 to 100.00
3
Setting values
0.00 to 100.00
0.00 to 100.00
4
H value shown
When Key is selected (with SDI-interfaced DME)
Knob Parameter Adjustment
1 H Horizontal
defocusing of
key signal
2 V Vertical
defocusing of
key signal
3 All Horizontal
and vertical
defocusing of
key signal
To cancel black level leaking that can occur at the edge
of the screen when the Defocus effect is enabled, press
[Clean Defocus], turning it on.
In the DME menu, select VF2 'Video Modify' and
HF1 'Defocus/Blur.'
The Defocus/Blur menu appears.
Press [Blur], turning it on.
Notes
On the MVE-8000A, the Glow and Blur effects cannot
be enabled at the same time. The effect which was
turned on most recently is enabled.
When the DME is connected through an SDI interface,
in the <Blur Mode> group, select the signal to which
you want apply the Blur effect.
Video/Key: Video signal and key signal
Video: Video signal only
Key: Key signal only
Set the parameters.
When the DME dedicated interface is used
Knob Parameter Adjustment
1 H Horizontal
defocusing of
video and
key signals
Applying Special Effects (Effects on the Overall Video Signal)
Settings values
0.00 to 100.00
0.00 to 100.00
H value shown
Setting values
0.00 to 100.00
255