Memory Stick"/Usb Connections Block - Sony MVS-8000X User Manual

b Menu display
This shows the menu currently in use.
c Knobs
These adjust the parameter values appearing in the menu.
d User preference buttons
These recall the functions or menus assigned to them in the
Setup menu.
In the default setup, nothing is assigned to the [PREFS 1]
to [PREFS 7] buttons.
It is also possible to change the assignment of these buttons
in setup.
For details, see "Assigning Functions to User Preference
Buttons" in Chapter 19 (Volume 2).
PREFS 8 button: When this button is on, control of an
editor from the Remote1 port on the rear panel of the
switcher is possible. However, even when it is off,
control of the Edit PVW bus is always possible.
"Memory Stick"/USB Connections
Block
1 "Memory Stick" status indicator
2 "Memory Stick" slot
4 POWER A, B status indicators
a "Memory Stick" status indicator
Lights in red during access to a "Memory Stick."
Notes
Do not power the unit off or remove a "Memory Stick"
when the "Memory Stick" status indicator is lit.
b "Memory Stick" slot
Insert "Memory Sticks." You can use it in software
installation, and for saving and reading data, such as
snapshot, keyframe, effect, and setup data.
See the next item, "About "Memory Sticks"" for more
information about the usable "Memory Sticks" and their
handling.
c DEVICE connectors
There is a USB connector.
You can connect a device such as a mouse, keyboard, USB
storage, and so on, that is equipped with a USB interface
to any of these connectors.
For details on the devices that can be connected, consult
your Sony representative.
d POWER A, B status indicators
The status indicators light in green when the unit is
powered on.
The POWER B status indicator does not light when the
optional HK-PSU11 Power Supply Unit is not supplied in
the factory configuration.
About "Memory Sticks"
Usable "Memory Sticks"
This unit has been confirmed to operate with those of the
following "Memory Sticks" that have a capacity of 8 GB
(gigabytes) or less. However, operation with all "Memory
Sticks" is not guaranteed.
• "Memory Stick"
• "Memory Stick PRO"
• "Memory Stick Duo"
• "Memory Stick PRO Duo"
Notes
• When using a "Memory Stick PRO," high-rate data
3 DEVICE
transfer using parallel interface is not supported.
connector
• A "MagicGate Memory Stick" can also be used, but this
system does not support the MagicGate function.
• When using a "Memory Stick Duo," be sure to use it
with a "Memory Stick Duo Adaptor" (MSAC-M2 or
equivalent). If you insert a "Memory Stick Duo" without
using the adaptor, there is the possibility that the stick
cannot be removed, resulting in a serious accident.
Names and Functions of Parts of the Control Panel
39