Sony MVS-8000X User Manual page 70

To change the keys and background presets in
Setup menus simultaneously: Press the [ALL]
button.
To allocate a particular next transition button to the
[ALL] button function, see "Setting the Operation
Mode of the [ALL] Button in the Transition Control
Block" in Chapter 19 (Volume 2).
3
For the transition to change the key priority, set the
priority for after the transition.
When using keys 1 to 8, see "Priority Setting for Keys
1 to 8" (page 73). For details of the key priority setting
operation, see "Key Priority Setting" (page 71).
4
Select the new video used for the transition.
• In the background B row of cross-point buttons,
select the new background video.
• When inserting a key, select the key signal, and
make any required settings.
For details of key settings, see Chapter 4 "Keys"
(page 89).
To carry out a cut transition, skip to step 7; otherwise
continue to step 5.
5
Select one of the transition type selection buttons in
the transition control block.
To carry out a dissolve to the new video: Press one
of the [MIX], [NAM], [SUPER MIX], and [PST
COLOR MIX] buttons, turning it on.
To carry out a wipe: Press the [WIPE] or [DME]
button, turning it on.
To carry out a transition while playing back a
frame memory clip: Press one of the buttons
corresponding to the clip to be used
(FM1&2CLIP, FM3&4CLIP, FM5&6CLIP, and
FM7&8CLIP).
You can also use the Misc >Transition menu to select
a desired transition type for the M/E or PGM/PST
bank. (See "Selecting the Transition Type by a Menu
Operation" (page 74).)
For an overview, see "Transition Types" (page 68).
Notes
The transition type selection buttons in the transition
control block can be interchanged in the setup menu.
For details, see "Overall Control Panel Settings
(Config Menu)" in Chapter 19 (Volume 2).
6
Make the required settings, according to the selected
transition type.
For details of the settings, see the relevant section.
70
Procedure for Basic Transition Operation
Super mix: "Super Mix Settings" (page 75)
Preset color mix: "Color Matte Settings" (page 75)
Wipe: "Basic Procedure for Wipe Settings" (page
124)
DME wipe: "Basic Procedure for DME Wipe
Settings" (page 144)
Clip transition: "Clip Transition Operations" (page
173)
Using the transition preview function (see page 83),
you can check the transition on the preview monitor.
7
Carry out the transition in the transition execution
section.
For a gradual transition such as a mix (dissolve) or
wipe: Press the [AUTO TRANS] button, or
operate the fader lever.
To execute a transition by pressing the [AUTO
TRANS] button, first set the transition rate
(specified as the duration of the transition).
(See "Setting the Transition Rate" (page 77).)
When you have selected a wipe or DME wipe as
the transition type, you can also set the transition
range. (See "Pattern Limit" (page 79).)
For an instantaneous transition: Press the [CUT]
button.
For details, see "Executing a Transition" (page 77).
Transition linked to the audio mixer
If the video signal selected in the background B row is
linked to the audio mixer in setup, then the audio mixer
sound changes with the transition. That is, pressing the
[AUTO TRANS] button gives a cross fade, and pressing
the [CUT] button gives an instantaneous sound switch.
For details of setup, see "Making Settings for Audio
Mixer" in Chapter 19 (Volume 2).
Notes
• The audio mixer is not linked to a snapshot or key frame
transition.
• The audio mixer is not linked to a transition using the
fader lever.
• If the bus-fixed mode (see page 82) is selected in the
setup menu, and the fader lever is in the lowest position,
there is a cross fade from the audio selected on the B row
to the audio selected on the A row.
• The audio mixer is not linked to a key transition.
• In the following cases, the audio and video may be out of
sync.
- When carrying out a cross fade in some DME wipes
(for example, "picture in picture")
- When executing a preset color mix in two-stroke mode
• For details of audio mixers that can be used, contact your
Sony service or sales representative.