Using the M/E-4 Bank
Assigning a Button for M/E-4 Selection in the Setup Menu
• In the factory defaults for this system, M/E-4 is not
assigned to buttons on the control panel.
Control block
Cross-point control
block
Entire switcher bank -
Key control block
Device control block Region selection
Numeric keypad
control block
Menu control block
344
Using the M/E-4 Bank
Button
Menu number
Reentry buttons
7322.1
7322.5
7321
Delegation buttons
7321.29
7321.17
buttons
Region selection
7321.7
buttons
Top menu selection
7321.19
buttons
• To select M/E-4, assign buttons in the Setup menu
according to the following table.
Reference in User Guide
"Control Panel Setup (Panel)" and "Cross-Point Settings (Xpt
Assign Menu)" in Chapter 19 (Volume 2)
"Creating Cross-Point Assign Tables"
Engineering Setup >Panel >Xpt Assign >Table Button Assign
menu
Engineering Setup >Panel >Xpt Assign >Main,V/K Pair Assign
menu
"Interchanging the Bank Order or Disabling Operation"
Engineering Setup >Panel >Config menu
"Assigning Functions to Key Control Block Buttons"
Engineering Setup >Panel >Config >Link/Program Button >Key
Control Module >Button Assign menu
"Assigning Functions to the Device Control Block"
Engineering Setup >Panel >Config >Link/Program Button
>Joystick/Trackball Module menu
"Assigning a Region to the Region Selection Buttons in the
Numeric Keypad Control Block"
Engineering Setup >Panel >Config >10 Key Region Assign
menu
"Assigning Functions to the Menu Control Block Top Menu and
User Preference Buttons"
Engineering Setup >Panel >Config >Link/Program Button
>Menu Panel menu