Trail Settings - Sony MVS-8000X User Manual

Mat: An effect like light striking paper, cloth, or
another diffusively reflective surface.
2
Set the following parameters.
Knob Parameter Adjustment
1 Intensity
2 Offset
3 Width
4 Soft
a) For SD 4:3 and SD 16:9
b) For HD 4:3
c) For HD 16:9
3
When you select Normal or Mat in step 1, press [Bar
Diffuse Color], turning it on, and adjust the following
parameters to set the color of the diffuse light area.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
With no selection
With a selection made in
made in the <Bar
the <Bar Light Mode>
Light Mode> group
group
Bar Light
Diffuse Light
Bar Light
282
Applying Special Effects (Lighting and Recursive Effects)
Setting values
Intensity of 0.00 to 100.00
diffuse light
area
Offset of –4.00 to +4.00
center of –12.00 to +12.00
diffuse light –16.00 to +16.00
area
Width of 0.00 to 100.00
diffuse light
area
Softness of 0.00 to 100.00
diffuse light
area
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
Hue 359.99 to 0.00
Width
Diffuse Light
Offset = 0

Trail Settings

Notes
• Of the three effects of trail, motion decay and keyframe
strobe, only one can be on at a time. When one of them
is on, turning another of them on automatically turns off
the one that has been on.
• Turning Trail on when Motion Decay (see page 284),
a)
Keyframe Strobe (see page 285) or Wind (see page 286)
b)
is on turns it off automatically.
c)
Applying the Trail effect
1
In the DME menu, select VF5 'Light/Trail' and HF2
'Trail.'
The Trail menu appears.
2
Press [Trail], turning it on.
3
Set the parameters.
Knob Parameter Adjustment
1 Decay
2 Interval
3 Live
a) 0.00 is no trail. At 100.00, the trail does not disappear.
4
To erase the trail, press [Trail Eraser], turning it on.
Switching the priority between the current
image and trail superimposed
In the <Priority> group, select the method of
superimposition.
Over: Current image is on top.
Under: Trail is on top.
Selecting the source to create a trail
In the <Trail Source> group, select the source to create a
trail.
Setting values
Degree to 0.00 to 100.00
which the
trail is left
Freeze 1 to 255 (frames)
interval
Proportion of 0.00 to 100.00
the interval
between two
successive
freeze
images for
which the
video is run
a)