Files; Setup - Sony MVS-8000X User Manual

Menu macros
The term "menu macro" refers to the function whereby a
sequence of menu operations is saved as data in memory,
so that it can be recalled as required to automatically
execute the same sequence of operations.
Macro timeline
By recording macro recall and execute action on a
timeline, in the same way as for keyframes in an effect,
you can automatically execute them in a sequence.
Macro attachment
Macro attachment is a function whereby a macro register
is assigned to a control panel button or a particular position
of a fader lever, linking the execution of the button
function or a fader lever operation with a macro execution.
For details, see Chapter 16 "Macros" (Volume 2).

Files

You can save register data, including setup information
and snapshot information, as a file on a hard disk or
memory card, and recall it as required.
You can operate on individual files or registers, or together
in a batch.
Regarding frame memory, it is possible to capture image
data stored in an external device into frame memory.
The following files can be saved and recalled.
• Operation mode setup data for system as a whole and
individual devices
• Device status data for system startup
• Key memory setting data
• Video process memory setting data
• Keyframe effect setting data
• Snapshot setting data
• Wipe snapshot setting data
• DME wipe snapshot setting data
• Key snapshot setting data
• Shotbox setting data
• Macro setting data
• Macro attachment data
• Menu macro setting data
• Frame memory image data
For details, see Chapter 17 "Files" (Volume 2).
26

Setup

Setup
Various settings are required, in order to operate the
switcher, control panel, DME, external devices, and so on,
connected together in a single system.
This is referred to as "setup," and you can carry out the
setup operations from the Engineering Setup menu.
The settings in the Engineering Setup menu are grouped
under the following headings.
System setup (System)
For details, see Chapter 18 "System Setup" (Volume 2).
Panel setup (Panel)
For details, see Chapter 19 "Control Panel Setup
(Panel)" (Volume 2).
Switcher setup (Switcher)
For details, see Chapter 20 "Switcher Setup (Switcher)"
(Volume 2).
DME setup (DME)
For details, see Chapter 21 "DME Setup (DME)" (Volume
2).
DCU setup (DCU)
For details, see Chapter 22 "DCU Setup (DCU)" (Volume
2).
Router/tally setup (Router/Tally)
For details, see Chapter 23 "Setup Relating to Router
Interface and Tally (Router/Tally)" (Volume 2).
User setup (User Setup)
For details, see Chapter 24 "User Setup (User Setup)"
(Volume 2).