Sepia Settings; Mono Settings; Posterization And Solarization Settings - Sony MVS-8000X User Manual

Knob Parameter Adjustment
4 Aspect Aspect ratio
of shrunken
images
a) Specify minus values to stretch the image in the vertical direction,
and plus values to stretch the image in the horizontal direction.
16:9 mode
Knob Parameter Adjustment
1 Center X x-value of
shrinking
center point
2 Center Y y-value of
shrinking
center point
3 Size Shrinking
ratio
4 Aspect Aspect ratio
of shrunken
images
a) Specify minus values to stretch the image in the vertical direction,
and plus values to stretch the image in the horizontal direction.

Sepia Settings

Applying the Sepia effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Sepia], turning it on.
3
Set the following parameters.
Knob Parameter Adjustment
1 Mix Y Y signal mix
amount
2 Mix C Chroma
signal mix
amount
3 Mix All Y signal and
chroma
signal mix
amount
4
To set the color of the sepia image, press [Sepia
Color], turning it on, and adjust the parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
Masking the Sepia effect with a selected
Setting values
pattern
–100.00 to +100.00
a)
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 261).

Mono Settings

Setting values
Applying the Mono effect
–4.00 to +4.00 (SD)
–16.00 to +16.00
1
(HD)
–2.25 to +2.25(SD)
–9.00 to +9.00 (HD)
0.00 to 100.00
2
–100.00 to +100.00
a)
Masking the Mono effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 261).
Posterization and Solarization
Settings
You can specify the degree of luminance coarsening.
You can specify the degree of chroma coarsening.
Applying the Posterization or Solarization
effect
1
Setting values
2
0.00 to 100.00
3
0.00 to 100.00
Mix Y value shown
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
Press [Mono], turning it on.
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
Press [Poster/Solar], turning it on.
Set the parameters.
Knob Parameter Adjustment
1 Poster Coarseness
of luminance
gradations
(Posterization
parameter)
2 Solar Coarseness
of chroma
gradations
(Solarization
parameter)
Applying Special Effects (Effects on the Overall Video Signal)
Setting values
0.00 to 100.00
0.00 to 100.00
257