Sony MVS-8000X User Manual page 174

Background transition display area
Clip display area
3
Press the [Clip] button.
The status area shows a list of clips.
4
Select the clip to use in the clip transition.
5
Return to the Clip Transition menu, and in the <BKGD
Transition Type> group, select the background
transition type.
Notes
For details of the background transition selected here,
see the various adjustments in the M/E-1 >Misc
>Transition menu.
6
In the <Select> group, press [BKGD Transition].
7
Use either of the following methods to set the
background transition start point independently of the
clip playback timing.
• Move the fader lever to the desired position, and in
the <BKGD Transition Set Timing> group press
[Start].
• Turn knob 1 to set the number of frames. (The left
end of the reference axis (see following figure) is the
position of frame 0.)
174
Clip Transition Operations
Clip transition display area
Position of frame 0
8
Using either of the following methods, set the end
point of the background transition.
• Move the fader lever to the desired position, and in
the <BKGD Transition Set Timing> group press
[Stop].
• Turn knob 2 to set the number of frames.
9
If Wipe or DME Wipe is selected in the <BKGD
Transition Type> group, in the <BKGD Transition
Direction> group, select the background transition
direction.
10
In the <Select> group, press [FM1&2 Clip].
11
Using either of the following methods, set the start
point of the clip.
• Move the fader lever to the desired start point, and in
the <Clip Transition Set Timing> group press
[Start].
• Turn knob 1 to set the number of frames. (The left
end of the reference axis (see previous figure) is the
position of frame 0.)
Notes
It is not possible to set the end point.
12
In the <Clip Transition Direction> group, select the
playback direction of the clip.
To reset the start point and end point
Press [Timing Reset].
The background transition start point and end point, and
the clip start point are all reset.
Reference axis