Independent Key Transitions - Sony MVS-8000X User Manual

Transition Switcher setup
Preview mode (Transition menu)
<Transition
Preview> group
One Time One Time
Notes
• During a transition, whether executed with the [AUTO
TRANS] button or the fader lever, it is not possible to
press the [TRANS PVW] button.
• In bus fixed mode (see page 82), transition previews are
not available.
84

Independent Key Transitions

Panel setup
Independent Key
(Operation
>Custom Button
Transitions
menu)
<Trans Pvw> group
–
What is an independent key transition?
In addition to common transitions, it is possible to carry
out independent transitions on the keyers of the M/E banks
and PGM/PST bank. These are called "independent key
transitions."
By carrying out an independent key transition in
combination with a common transition, different transition
types can be used for the background and keys. It is also
possible to use different transition types for key insertion
and key deletion by means of a Setup menu setting (see
page 86).
Combining other transitions with
independent key transitions
When you set a common transition and a key independent
transition for the same key, you can apply two different
effects such as a wipe and mix (dissolve) (see page 68) to
the key simultaneously.
When carrying out such a combination of transitions
simultaneously on a key as auto transitions (see page 80),
the result depends on the timing of pressing the respective
[AUTO TRANS] buttons.
Simultaneous execution
If the [AUTO TRANS] buttons for the two transitions are
pressed simultaneously, the following is the result.
Note that in both cases the common transition is a wipe and
the independent key transition is a mix (dissolve).
Deleting a key with simultaneous transitions: With the
key inserted, it is deleted simultaneously with the two
transitions.
When the common transition completes, even if the
independent key transition is still not completed, the
two end simultaneously.