Recalling Files - Sony MVS-8000X User Manual

Notes
When you execute [Replace], all of the saved files in
the logical drive is erased immediately before the
saving operations.
4
Press [Yes].
This starts the file saving operation. If there is no
directory, a directory is automatically created, and the
files are saved within it. A progress bar and numerical
indication appear to show the progress of the
operation.
When the operation is completed, a popup window
reading "Completed." appears.
5
Press [OK].
To rename a directory
Select a directory in the list, and in the button area press
[Rename].
In the keyboard window that appears, enter the new
directory name, and press [Enter]. The name of a directory
is limited to eight characters.
Notes
The following names cannot be used:
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1,
COM2, COM3, COM4, COM5, COM6, COM7,
COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9

Recalling Files

You can recall all of the saved files on the hard disk drive
into frame memory.
1
Carry out steps 1 and 2 of the procedure "Saving
Files" (page 177).
Notes
It is not possible to select a partition (FMHDD1 to
FMHDD15) of a hard disk in which no file is saved.
2
In the <Restore> group, do either of the following.
• To replace the existing data with the recalled data,
press [Replace].
• To add the recalled data to the existing data, press
[Append].
A popup window for confirming file recall appears.
178
External Hard Disk Drive Access
Notes
When you execute [Replace], any existing data in
frame memory is lost immediately before the recalling
operations.
3
Press [Yes].
This starts the file recall operation. A progress bar and
numerical indication appear to show the progress of
the operation.
When the operation is completed, a popup window
reading "Completed." appears.
4
Press [OK].