Metal Settings; Dim And Fade Settings - Sony MVS-8000X User Manual

To set the color of the sections other than the
outlines for Draw
Press [Matte], turning it on, and adjust the following
parameters to set the color of the sections other than
the outlines.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
To select the signal to mix with the relief pattern for
Relief
In the <Chroma Type> group, select the signal to mix
with the relief pattern.
Matte: Select a single color. The following
parameters can be adjusted.
Knob Parameter Adjustment
2 Saturation
3 Hue
Video: Select the input video signal.
6
To invert white and black in the extracted video, or to
invert the outlines and the sections other than the
outlines, press [Nega], turning it on.
Masking the Sketch effect with a selected
pattern
Press [Mask] to display the Mask menu and set the type of
pattern and modifiers (see page 261).

Metal Settings

Applying the Metal effect
1
In the DME menu, select VF7 'Enhanced Video
Modify' and HF2 'Metal.'
The Metal menu appears.
2
Press [Metal], turning it on.
3
Set the parameters.
Knob Parameter Adjustment
1 Mix Ratio
2 Y Clip
260
Applying Special Effects (Effects on the Overall Video Signal)
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
Hue 359.99 to 0.00
Setting values
Saturation 0.00 to 100.00
Hue 359.99 to 0.00
Setting values
Mix amount 0.00 to 100.00
for Metal
video and
input video
Clip level of 0.00 to 100.00
input signal
Y level
Knob Parameter Adjustment
3 Y Gain Amount of
gain for clip
adjusted
input signal
Y level
4 Y Offset Offset added
to clip and
gain
adjusted
input Y
signal
4
In the <Metal Mode> group, select the type of metallic
gloss.
Gold: Give a gold gloss to the input video.
Silver: Give a silver gloss to the input video.
Rainbow: Give a rainbow color gloss to the input
video.
Variable: Give a metallic gloss to the input video in
any color by adjusting the following parameters.
Knob Parameter Adjustment
2 Saturation Saturation
3 Hue Hue
Masking the Metal effect with a selected
pattern
Press [Mask] to display the Mask menu and set the type of
pattern and modifiers (see page 261).

Dim and Fade Settings

Notes
The Dim and Fade functions are not supported on the
MVE-8000A.
Applying the Dim effect
1
In the DME menu, select VF7 'Enhanced Video
Modify' and HF3 'Dim & Fade.'
The Dim & Fade menu appears.
2
Press [Dim], turning it on.
3
Set the following parameters.
Knob Parameter Adjustment
1 Start Point where
dimming
starts (dim
start point)
Setting values
–100.00 to +100.00
0.00 to 100.00
Setting values
0.00 to 100.00
359.99 to 0.00
Setting values
–100.00 to +100.00